QR code

CANDICE-7 PRO

Display for displaying measurement data via CAN HS, CAN FD. Logger interaction via openABK.

  • 7" TFT, IPS, 1280 × 800
  • Sunlight readable
  • PCAP Touch
  • 4 × CAN-FD optional
  • Wake-On-CAN opt.
  • Speaker, Microphone
  • openABK
  • 6..50 V Supply
  • Compact 178 × 120

Robust and powerful – that's CANDICE-7 PRO when visualizing measurement data. Display values from the up to four built-in CAN interfaces and openABK data loggers.

The incoming messages are read in via the separately galvanically isolated CAN interfaces, decoded and then displayed. Block Diagram At the same time, data from a data logger can be visualized via the openABK interface.

Using a touch, you can navigate between layout pages, individualize display elements, start actions and enter data conveniently.

Create the configuration on the PC with the free tool EMBU-SKETCH and then transfer it via cable or a USB stick.

The attractive safety housing made of aluminum underlines the value of your project.

Technical Specifications

General Intelligent display for data visualization
CPU 2×1 GHz Dual-Core ARM Cortex-A9, 256 MB DDR2, 512 MB Flash
Display 7" (178 mm), 16:10, 1280 × 800 pixel, viewing angle 88/88/88/88 °
1000 cd/m², sunlight readable, contrast 800:1
Light sensor
PCAP touch, optically bonded, splinter protection
Graphics-Engine NVIDIA 2D- and 3D graphics accelerator
Interfaces
4 × CAN FD, 8 MBaud
 individually insulated,
selectable terminators		 DSub9 Pins *1)
1 × LIN as future option DSub9 Pins *2)
2 × USB 2.0 Host (1 × at rear side, 1 × at right side) USB-A  
1 × USB Device USB-miniB
1 × openABK: Supply, Run/Terminal-15, Wake, Ethernet openABK circular connector
1 × Micro-SD-Slot MicroSD  
Audio Loudspeaker at the back, microphone with automatic gain control at the front
Buttons Trigger, Left/Right, F1..F3, Menu, Power
Supply 6..50 V, ca. 4..7,5W, depending on CPU load and backlight
Wake-On-CAN on CAN1 (selectable)
Temperature -40..+85 °C storage, -20..+70 °C operating
Housing W×H×D: (178 × 120 × 17) mm³ + connector box 12 mm
Aluminum black anodized
Mass typ. 570 g
*1) Equipped depending on the variant, two CAN channels per connector   *2) On DSub from CAN1/2

Variants

openABK CAN 1…4 LIN Preferential type
C7PRO-AFFFF ✔ CAN FD – ✔
C7PRO-A ✔ – – –

Accessories

3D Print Manual Firmware

More to like