QR code

CANDICE-4

Instrument for operating and displaying measurement data via CAN and openABKK

  • 4,3" TFT, sunlight readable
  • Touch
  • Up to 4 × CAN-FD
  • Wake-On-CAN
  • Speaker, Microphone
  • Ethernet, openABK
  • USB
  • 6..50 V Supply
  • Compact: 118×77×18 mm³

Compact and powerful – that's CANDICE-4 when visualizing measurement data. Simply display values from the CAN interfaces and from openABK data loggers.

The incoming messages are read-in via the individually galvanically isolated CAN interfaces, Block Diagramdecoded and finally displayed. CANDICE-4 even starts at activity on the CAN bus automatically, if desired. In parallel, data from a data logger can be visualized via the openABK interface. By the way, openABK also serves as an interface for further data, e.g. for instructions to the driver.

Use the touch screen to navigate between layout pages, individualize display elements, start actions and enter data conveniently.

You can create and transfer the layouts quickly and efficiently on the PC with the free designer EMBU-SKETCH.

Technical Specifications

General Intelligent display for data visualization
CPU 2×1 GHz Dual-Core ARM Cortex-A9, 256 MB DDR2, 512 MB Flash
Operating System Windows® Embedded Compact 7
Display 4,3" (109 mm), 16:9, 480 × 272 Pixels
1000 cd/m², sunlight readable, light sensor
Touch: resistive
Graphics Engine NVIDIA 2D- and 3D graphics accelerator
Interfaces
4 × CAN-FD,
each isolated individually,
up to 1 MBaud, switchable termination
Central connector *1)
4 ×
USB 2.0 Host 2 × at rear side
2 × at bottom
Central connector
USB-A
 
1 × USB Device USB-miniB
1 × Ethernet 10/100 MBit Central connector *2)
2 × Digital-Out Central connector
2 × Digital/Analog/PWM-In Central connector  
1 × Micro-SD-Slot MicroSD  
1 × Supply and terminal-15 input Central connector  
Audio Speaker at rear side, microphone with automatic gain control at front side
Buttons Trigger, Left/Right, Power
Central Connector Adaption plate with Micromatch receptacles, strain relief and bending protection. For building individual central cable joints.
Supply 6..50 V, approx. 5 W, depending on CPU load and speaker activity. Wake-On-CAN on CAN1 selectable
Temperature -40..+85 °C storage, -20..70 °C operation
Housing W×H×D: (118 × 77 × 18) mm³, Aluminum black anodized
Mass 230 g
Scope of Delivery 1 × CANDICE-4 Display
1 × docking plate
*1) Availability dependent on device variant  *2) suitable for openABK

Variants

Touch CAN LIN Preferential type
CANDICE4-TFFE 4 × FD on request
CANDICE4-TCCE 4 × 2.0 on request obsolete
CANDICE4-TE on request

Accessories

More to like