Gooseneck Mounting
Mounting via a flexible Metal Hose and a Ball Head
- Reinforced Version of the Bending Tube
- Stable Ball Head, made of Aluminium
- Thread ¼" 20 UNC (a.k.a. Photo Thread)
The gooseneck design is suitable for mounting e.g. on the center tunnel. Two semicircular aluminum clamping jaws, which are clamped together with two screws, hold the metal hose. This unit can now be bolted to a surface using four countersunk mounting holes.
At the upper end of the gooseneck there is a ¼-20 UNC photo thread onto which a ball head can be screwed. Its position can be tilted by up to 90°, which allows it to be flanged onto a display with a ¼-20 UNC thread on the back. The central locking screw fixes the ball head and the lower axis of rotation.
Since the metal hose can absorb high forces, the system is suitable for permanently mounting the 4.3" and 7" displays CANDICE-4 or CANDICE-7.
The system has a modular structure. Depending on your requirements, the necessary components should be ordered separately.
Technical Specifications
Component "Metal Hose"
| General | Flexible metal hose, painted black |
| Material | Steel spiral with brass casing, painted matt black |
| Dimensions | ⌀ = 18 mm, L = 40 cm |
| Bottom end | no termination |
| Top end | ¼–20 UNC outer thread, L = 10 mm |
| Scope of delivery |
1 × Metal hose |
Component "Jaw Set"
| General | Set of two clamping jaws to hold the gooseneck Threaded pin for additional securing of the gooseneck |
| Material | Aluminum, black anodized |
| Dimensions | set in assembled condition (L×W×H) 56,6 × 56,6 × 30,0 mm³ |
| Attachment | Square hole pattern 34 × 34 mm For M5 countersunk screws |
| Scope of delivery |
2 × Jaws 2 × M5 countersunk screw × 25 DIN7991, black, for clamping 1 × Grub M5 × 6 to secure the metal hose |
Component "Ball Head"
| M-HKUG2439 | M-HKUG3665 | M-HKUG3966 | |
|---|---|---|---|
| Mnemonic | Tiny | Standard | Versatile |
| Suitability | up to Display 4.3" | up to Display 7" | up to Display 7" |
| Scope of delivery |
1 × Ball head, *1) |
||
For more information see Ball Head
Component "Small Parts"
| General | Fastening parts |
| Scope of delivery |
5 × Black cable tie, UV-stable 4 × Self-tapping screw 4.2 x 45, stainless steel, DIN7982 1 × Washer 6,4/18×1,6 mm, DIN9021, *2) |
<tbc> = to be clarified
Components
| Metal hose | Jaw | Ball head | Small parts | ||
|---|---|---|---|---|---|
| M-GNB18X400-UNC025-0 | ✔ | – | – | – | |
| JAWSET575714 | – | ✔ | – | – | |
| GNS-400-T | ✔ | ✔ | M‑HKUG2439 |  Tiny |
✔ |
| GNS-400-S | ✔ | ✔ | M‑HKUG3665 |  Standard |
✔ |
| GNS-400-V | ✔ | ✔ | M‑HKUG3966 |  Versatile |
✔ |