Power Supply Cable
Cable for supplying devices with voltage
- Robust circular Plug
- 4mm Banana Plugs with rear cascading Capability
- High Copper Cross-Section
- Push-pull lock
These cables can supply power to devices. There are different circular connectors, depending on the device to be supplied. Thanks to their push-pull locks, they are reliably attached and pulling them off is very easy.
Since the displays for PCs switch on automatically, synchronously with the PC, you do not need a control line. Two wires are therefore sufficient.
The intelligent CANDICE-7 display can be switched on using a third, yellow wire, e.g. via terminal 15.
4mm banana plugs are attached to the power supply end. Additional banana plugs can be plugged into the back. They allow quick setups, e.g. in the laboratory on the power supply.
Technical Specifications
| General | Power supply cable with banana plug |
| Shell color | Black |
| Connector | 4 mm banana plug with plug-in option on the back Red and black for supply Three core cables with yellow banana plug for control |
| Number of leads | See variant table |
| Length | See variant table Length from junction to banana plugs: approx. 25 cm |
Variants
| Schematics | Circular Connector | Leads | Length | Application | |
|---|---|---|---|---|---|
| E-KAB-LEM302-BAN2-015 | FGG.1B.302 | 2 | 1,5 m |
BLADE-07 COLORADO-10 HELIOS-12 SPARK-15 |
|
| E-KAB-LEM302-BAN2-030 | 3 m | ||||
| E-KAB-LEM302-BAN2-070 | 7 m | ||||
| E-KAB-ABK-BAN3-015 | openABK, long type | 3 | 1.5 m | CANDICE-7 ab V5 |
|
| E-KAB-ABK-BAN3-050 | 5 m |