Download BEAM-10 Firmware

Firmware for the Displays BEAM-10

Applicable to these Products

Procedure for an update

  1. Download the ZIP file (latest version <tbc>) and extract the files to anywhere you want.
  2. Connect the display to be updated to a PC via USB.
    Since the display cannot show anything during the update process, please use e.g. a notebook, which does not need the display to be updated.
  3. Start the programming tool HIDBootLoader.exe.
  4. Hold down the recessed button on the back while applying the supply voltage. The message Device attached appears on the programming tool.
    Maintenance Button
  5. Click on Open Hex File and select the recently extracted file FwAssist.hex.
    Bootloader - Device attached
  6. Click on Program/Verify and wait until the programming procedure has finished.
    Bootloader - Succeeded
  7. Disconnect the display from the power supply and then re-connect it. A sequence of signals sounds for approx. 5..10 seconds. Upon completion, the display is ready for use.

Revision History